20 Simple Tips for Maintaining a Pole Saw |
Posted: February 13, 2018 |
If you have a yard full of trees or work as a professional gardener or forester, then you understand how helpful a pole saw can be. Chainsaws are useful for felling trees and clearing thick brush, but they're too hazardous for cutting overhead limbs and branches. For that, you're going to have to use a pole saw. This power tool is ideal for pruning trees to your specification and cutting down branches which may pose a hazard to people. Pole saws are very similar to chainsaws. In the pole saw's case, the bar and chain are attached to a pole shaft. Since the shaft allows the user greater reach, pole saws are perfect for limbing and trimming branches. And like a chainsaw, a pole saw can also be incredibly dangerous in the hands of the inexperienced. Whether you're using a petrol model or an electric pole saw, the power tool requires routine maintenance to keep it in top shape. Machines are like people, they need to be cared for to ensure a safe and proper performance. Neglect the pole saw, and it will break down when you need it. Regular maintenance is vital to extend the service life and dependability of the pole saw. This is a guide to pole saw maintenance. Follow a few of these tips and you may be limbing and cutting branches down for a long time. Before and after use 1. Wipe the entire body, bar and chain of the pole saw with a damp cloth. Ensure that all wood chippings, sawdust and dirt have been removed. 2. Check whether the trigger lock is functional. The chain shouldn't turn if the trigger lock is engaged. Do not use the pole saw if it does. 3. Double check if engaging the stop switch turns off the pole saw. 4. Ensure that the chain cannot turn while the pole saw is in idle mode. 5. Clean the air filter after each use. Replace it if it's still too dirty or obstructed after cleaning. 6. Inspect the body and see that all screws and bolts are properly tightened. 7. If you are using a petrol pole saw, make certain there are no leaks before use. 8. Do not forget to clean under the protective cap. There might be dirt trapped inside which may transfer to the pole saw. Every week 9. See if the return spring, starter cord and starter are in good condition. Send the pole saw for repair if any of the three are broken or worn. 10. Lengthy exposure to vibration can lead to long-term nerve damage. Always check if the vibration dampeners are functional. 11. Clean the area surrounding the spark plug. Remove the plug and see if the plug gap and electrodes are in good condition. Replace the spark plug when needed. 12. Clean the cooling fins on the flywheel as dust and gunk tend to build up within the mechanism. 13. For mufflers without a catalytic converter, don't forget to clean or replace the spark arrestor screen. 14. Do an overall review and cleanup of the area surrounding the carburettor. Every month 15. Drain the gas tank and clean the insides. 16. Clean the carburettor. If needed, have a certified technician perform the cleanup. 17. Perform a thorough cleanup of the fan wheels. 18. Ensure that the fuel pipe and filter aren't worn down. Replace the parts if necessary. 19. The clutch and its components are sure to have worn down after a month of usage. Check the status of the damage, and replace if necessary. 20. Replace the spark plug.
|
||||||||||||||||||||||||||||||||||||||||||
|